dmesg - Desktop Performance
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-45-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfca7fff] usable
BIOS-e820: [mem 0x00000000bfca8000-0x00000000bfcbefff] reserved
BIOS-e820: [mem 0x00000000bfcbf000-0x00000000bfd80fff] usable
BIOS-e820: [mem 0x00000000bfd81000-0x00000000bfdbefff] ACPI NVS
BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfddefff] usable
BIOS-e820: [mem 0x00000000bfddf000-0x00000000bfdf6fff] ACPI data
BIOS-e820: [mem 0x00000000bfdf7000-0x00000000bfdfffff] usable
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.41 11/12/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0FFE00000 mask FFFE00000 write-protect
3 disabled
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0xbfa00000-0xbfbfffff]
[mem 0xbfa00000-0xbfbfffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbf9fffff]
[mem 0xbc000000-0xbf9fffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
[mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbfc00000-0xbfca7fff]
[mem 0xbfc00000-0xbfca7fff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0xbfcbf000-0xbfd80fff]
[mem 0xbfcbf000-0xbfd80fff] page 4k
init_memory_mapping: [mem 0xbfdbf000-0xbfddefff]
[mem 0xbfdbf000-0xbfddefff] page 4k
init_memory_mapping: [mem 0xbfdf7000-0xbfdfffff]
[mem 0xbfdf7000-0xbfdfffff] page 4k
RAMDISK: [mem 0x34810000-0x363fffff]
ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
ACPI: XSDT 00000000bfdf6120 00006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000bfdf4000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 00000000bfde2000 00D84D (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 00000000bfd8d000 000040
ACPI: DMAR 00000000bfdf5000 000040 (v01 ? 00000001 00000000)
ACPI: HPET 00000000bfdf3000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 00000000bfdf2000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 00000000bfdf1000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASF! 00000000bfdf0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 00000000bfde1000 000176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: BOOT 00000000bfde0000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 00000000bfddf000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bfdfffff]
Initmem setup node 0 [mem 0x00000000-0xbfdfffff]
NODE_DATA [mem 0xbfdfb000-0xbfdfffff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc200000-ffff8800bf1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbfca7fff]
node 0: [mem 0xbfcbf000-0xbfd80fff]
node 0: [mem 0xbfdbf000-0xbfddefff]
node 0: [mem 0xbfdf7000-0xbfdfffff]
On node 0 totalpages: 785712
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12216 pages used for memmap
DMA32 zone: 781715 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfca8000-0xbfcbefff]
PM: Registered nosave memory: [mem 0xbfd81000-0xbfdbefff]
PM: Registered nosave memory: [mem 0xbfddf000-0xbfdf6fff]
e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800bf800000 s82368 r8192 d24128 u524288
pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 773411
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-45-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Hewlett-Packard; Ver: F.41; Product Version: Rev 1
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-45-generic #74-Ubuntu
Hardware name: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.41 11/12/2009
000000000000000b ffffffff81c01de8 ffffffff81720eb6 ffffffff81c01e30
ffffffff81c01e20 ffffffff810677cd ffffffff81fe0010 ffffffff81fe0050
0000000000000000 ffffffff81de12c0 ffffffff81c01fb0 ffffffff81c01e80
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x18
[] warn_invalid_dmar+0x7e/0x90
[] check_zero_address+0x68/0xf4
[] detect_intel_iommu+0x15/0xae
[] pci_iommu_alloc+0x4a/0x6c
[] mem_init+0x17/0x9c
[] start_kernel+0x202/0x443
[] ? repair_env_string+0x5c/0x5c
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace 357a04f087bd9bed ]---
Memory: 3047996K/3142848K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 94852K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.704 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.40 BogoMIPS (lpj=8778816)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28554 entries in 112 pages
dmar: Host address width 36
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8778.81 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfd81000-0xbfdbefff] (253952 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:08:14, date: 02/05/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bfcb4c98 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bfcb2618 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bfcb3e18 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bfcb4f18 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x80e0-0x80ff]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x80c0-0x80df]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xda105c00-0xda105fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xda100000-0xda103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x80a0-0x80bf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x8080-0x809f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x8060-0x807f]
pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x8040-0x805f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xda105800-0xda105bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x8108-0x810f]
pci 0000:00:1f.2: reg 0x14: [io 0x8114-0x8117]
pci 0000:00:1f.2: reg 0x18: [io 0x8100-0x8107]
pci 0000:00:1f.2: reg 0x1c: [io 0x8110-0x8113]
pci 0000:00:1f.2: reg 0x20: [io 0x8020-0x803f]
pci 0000:00:1f.2: reg 0x24: [mem 0xda105000-0xda1057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xda106000-0xda1060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x8000-0x801f]
pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xda104000-0xda104fff 64bit]
pci 0000:01:00.0: [1002:9553] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0x7000-0x70ff]
pci 0000:01:00.0: reg 0x18: [mem 0xda000000-0xda00ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xda010000-0xda013fff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [14e4:4315] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd9000000-0xd9003fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd9ffffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x5000-0x50ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd1010000-0xd1010fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd1000000-0xd100ffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd8ffffff]
pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xd7000000-0xd7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:06:00.0: reg 0x10: [mem 0xd6000000-0xd60007ff]
pci 0000:06:00.0: reg 0x14: [mem 0xd6000d00-0xd6000d7f]
pci 0000:06:00.0: reg 0x20: [mem 0xd6000c80-0xd6000cff]
pci 0000:06:00.0: reg 0x24: [mem 0xd6000c00-0xd6000c7f]
pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
pci 0000:06:00.1: reg 0x10: [mem 0xd6000b00-0xd6000bff]
pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
pci 0000:06:00.2: reg 0x10: [mem 0xd6000a00-0xd6000aff]
pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
pci 0000:06:00.3: reg 0x10: [mem 0xd6000900-0xd60009ff]
pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
pci 0000:06:00.4: reg 0x10: [mem 0xd6000800-0xd60008ff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd6000000-0xd6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.5: PCI bridge to [bus 07-09]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:00:1c.5: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfca8000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfd81000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfddf000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x0600-0x060f] has been reserved
system 00:01: [io 0x0610] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0810-0x0817] has been reserved
system 00:01: [io 0x0820-0x0823] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [io 0x0380-0x038e] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs SYN1e04 SYN1e00 SYN0002 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs ENE0100 (active)
pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xda020000-0xda03ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd9ffffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd1020000-0xd102ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd8ffffff]
pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xd7000000-0xd7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd6000000-0xd6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-09]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:00:1c.5: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xda000000-0xda0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xd9000000-0xd9ffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xd8000000-0xd8ffffff]
pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xd7000000-0xd7ffffff]
pci_bus 0000:05: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0xd6000000-0xd6ffffff]
pci_bus 0000:06: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xd5000000-0xd5ffffff]
pci_bus 0000:07: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28608K (ffff880034810000 - ffff880036400000)
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1423159694.924:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6009
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004780000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (61 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xda105c00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xda105800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:324:139
block ram4: hash matches
acpi device:10: hash matches
rtc_cmos 00:03: setting system clock to 2015-02-05 18:08:15 UTC (1423159695)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
systemd-udevd[104]: starting version 204
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI Error: [_T_1] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node ffff8800bae71708), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node ffff8800bae716e0), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning: Evaluating _BQC failed (20131115/video-689)
acpi device:08: registered as cooling_device2
ACPI Error: [_T_1] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node ffff8800bae71988), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node ffff8800bae71960), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning: Evaluating _BQC failed (20131115/video-689)
acpi device:0a: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000652000, 00:26:9e:e6:88:91, XID 1c4000c0 IRQ 46
r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:06:00.1: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:06:00.1: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x103C:0x3628).
[drm] register mmio base: 0xDA000000
[drm] register mmio size: 65536
ATOM BIOS: BR34826.001
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
scsi3 : ahci
scsi4 : ahci
[TTM] Zone kernel: Available graphics memory: 1539728 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV710 Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105180 irq 47
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105380 irq 47
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880035f8dc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880035f8dc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004b9c598
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 48 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 2-4: new high-speed USB device number 2 using ehci-pci
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] radeon: dpm initialized
usb 2-4: New USB device found, idVendor=0408, idProduct=03f1
usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-4: Product: HP Webcam
usb 2-4: Manufacturer: SN001
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200LPVT-75G33T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200LPVT-7 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
firewire_core 0000:06:00.0: created device fw0: GUID 00241b002a12ba01, S400
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-1: new low-speed USB device number 2 using uhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
usb 4-1: New USB device found, idVendor=2188, idProduct=0ae1
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: USB OPTICAL MOUSE
hidraw: raw HID events driver (C) Jiri Kosina
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input8
hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.1-1/input0
[drm] fb mappable at 0xC045E000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
ata5: SATA link down (SStatus 0 SControl 300)
fbcon: radeondrmfb (fb0) is primary device
usb 7-2: new full-speed USB device number 2 using uhci_hcd
usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: HP Integrated Module
usb 7-2: Manufacturer: Broadcom Corp
ata6: SATA link down (SStatus 0 SControl 300)
Console: switching to colour frame buffer device 170x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
random: nonblocking pool is initialized
bio: create slab at 1
bio: create slab at 1
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Adding 3141628k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:3141628k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
systemd-udevd[412]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (525) terminated with status 1
ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
ene_ir: PLL freq = 1406
ene_ir: KB3926D or higher detected
ene_ir: Firmware regs: c0 00
ene_ir: Hardware features:
ene_ir: * Uses GPIO 40 for IR demodulated input
Registered IR keymap rc-rc6-mce
input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input9
rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
ene_ir: driver has been successfully loaded
hp_accel: laptop model unknown, using default axes configuration
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR RC6 protocol handler initialized
lis3lv02d: 8 bits sensor found
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
IR NEC protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 249
input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input10
IR MCE Keyboard/mouse protocol handler initialized
IR RC5(x) protocol handler initialized
IR JVC protocol handler initialized
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
IR LIRC bridge handler initialized
WARNING! power/level is deprecated; use power/control instead
type=1400 audit(1423156124.768:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=522 comm="apparmor_parser"
type=1400 audit(1423156124.768:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=522 comm="apparmor_parser"
type=1400 audit(1423156124.768:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=522 comm="apparmor_parser"
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
type=1400 audit(1423156125.068:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=577 comm="apparmor_parser"
type=1400 audit(1423156125.068:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=577 comm="apparmor_parser"
type=1400 audit(1423156125.068:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=577 comm="apparmor_parser"
type=1400 audit(1423156125.068:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=577 comm="apparmor_parser"
type=1400 audit(1423156125.068:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=577 comm="apparmor_parser"
type=1400 audit(1423156125.068:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=577 comm="apparmor_parser"
usbcore: registered new interface driver btusb
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
INFO @wl_cfg80211_attach : Registered CFG80211 phy
init: failsafe main process (632) killed by TERM signal
lib80211_crypt: registered algorithm 'TKIP'
mute LED gpio 8 polarity 1
autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Internal Mic=0x18
Mic=0xb
wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)
input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HP WMI hotkeys as /devices/virtual/input/input16
gpio_ich: GPIO from 195 to 255 on gpio_ich
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
type=1400 audit(1423156131.192:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=987 comm="apparmor_parser"
type=1400 audit(1423156131.192:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=987 comm="apparmor_parser"
type=1400 audit(1423156131.192:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=987 comm="apparmor_parser"
type=1400 audit(1423156131.192:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=987 comm="apparmor_parser"
type=1400 audit(1423156131.192:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=987 comm="apparmor_parser"
type=1400 audit(1423156131.192:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=987 comm="apparmor_parser"
type=1400 audit(1423156131.556:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=986 comm="apparmor_parser"
type=1400 audit(1423156131.556:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=986 comm="apparmor_parser"
type=1400 audit(1423156131.560:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=986 comm="apparmor_parser"
type=1400 audit(1423156131.864:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=988 comm="apparmor_parser"
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf samples too long (5006 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU0: Core temperature above threshold, cpu clock throttled (total events = 52)
CPU0: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 42)
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
usb 1-4: new high-speed USB device number 3 using ehci-pci
usb 4-2: new full-speed USB device number 3 using uhci_hcd
usb 4-2: not running at top speed; connect to a high speed hub
usb 4-2: New USB device found, idVendor=058f, idProduct=6387
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Mass Storage
usb 4-2: Manufacturer: Generic
usb 4-2: SerialNumber: 8418CA19
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 8163328 512-byte logical blocks: (4.17 GB/3.89 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[15624]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 4-2: USB disconnect, device number 3
usb 1-4: new high-speed USB device number 6 using ehci-pci
usb 1-4: new high-speed USB device number 8 using ehci-pci
usb 4-2: new full-speed USB device number 4 using uhci_hcd
usb 4-2: not running at top speed; connect to a high speed hub
usb 4-2: New USB device found, idVendor=058f, idProduct=6387
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Mass Storage
usb 4-2: Manufacturer: Generic
usb 4-2: SerialNumber: 8418CA19
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi7 : usb-storage 4-2:1.0
scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 8163328 512-byte logical blocks: (4.17 GB/3.89 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 7:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[15938]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 4-2: USB disconnect, device number 4